Maverick
(
Mobile Crane Arm Base)
(Item #6290)

Features
- Heavy Duty Braking Applied To All 4 Wheels
- Gasoline Engine Or Electric Motor Capabilities
- Automatic Hydraulic Leveling In Less Than 5 Seconds
- Qualificed Driver Sent With Every Order
- Cruises At 50 MPH
- 4-Wheel Steering
- Defies Most Terrains
- Side Boards To Extend The Deck For Easy Walk Around
- Special Platform Setups For Use With Crane Arms
- Partial Crabbing Ability
- Remote Controlled Power Steering For Rear Wheels
-
Compatible With All Chapman Lenny Arms
- Compatible With All Chapman Telescoping Arms
- Compatible With All Technocrane Arms (Special Adapter Necessary)
- Many Accessories Available

Maverick With Walk Around Side Board System, Front Deck And 360 Degree Platform.
Specifications
| Standard Mount Height (Standing On Crane Deck) | 3 ft. 5 in. |
1.04 m |
| Minimum Height (To Top Of Center Post, Retracted) | 6 ft. 5 in. |
1.95 m |
| Travel of Center Post | 13 in. |
33 cm |
| Maximum Height (To Top Of Center Post, Extended) | 7 ft. 6 in. |
2.29 m |
| Maximum Payload* | 6,000 lb |
2,722 kg |
| Chassis Width | 7 ft. 7 1/2 in. |
2.3 m |
| Chassis Length | 16 ft. 2in. |
5.3 m |
| Chassis Deck Height | 3 ft. 4 in. |
1 m |
| Crane Traveling Weight (without Crane Arm) | 11,500 lb |
5,216 kg |
| Tread | 6 ft. 4 in. |
1.9 m |
| Wheel Base | 10 ft. 6 1/2 in. |
3.2 m |
| Tire Contact Patch (Tire Print) | 11 in. X 11 in. |
4.3 cm X 4.3 cm |
| Maximum Speed on Level Ground with Battery Power (ft./sec) | 11.2 ft/ sec. |
3.4 m/sec |
| Minimum Turn Radius to Outside of Chassis | 21 ft. 2 in. |
6.5 m |
| Standard Operational Unit Weight (No Payload) | 15,500 lb |
5,731 kg |
| *Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount. |
By Christine Huenergardt
Copyright © 2011 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
