Hustler IV
(Hydraulic Lift Camera Dolly)
(Item #20010)
 The Hustler IV Comes With Your Choice of The Standard or Compact Accessory Cart |
 |
|
Features
-New
Sliding Side Board System with both high and low positions, allowing a variety of
positions for the side boards, without
removing or changing the boards. Hustler IV Side Board System incorporates seat and/or
light pockets for convenient placement of seats or lights. -Accommodates
three types of steering modes: Conventional, Crab, and Round
-Built-in
heater system for constant arm speed, even in cold weather conditions
-Hustler
IV can be used with Rain House Cover
-Hustler
IV has new 12" extensions for the built-in Tracking Bar for use while dolly is on
track
-Works
on both straight or curved track without auxiliary wheels
-Performance
on track has been improved due to new track wheel design
-Works
on standard 24 1/2" dolly track
-Greater
payload, which enables the Hustler IV to carry many types of jib arms
-New
Hydraulic system for smoother, more precise camera moves
-Arm
is more rigid, due to improved bearing system
-Selectable,
adjustable single, double or triple detent system on main valve control for responsive
control of arm movement
-Improved
stop valve system which allows even faster, smoother stops
-New
built-in 4-way leveling head with built-in camera swing head with quick release locking
system, ergonomically designed for use on the set
-All
dolly deck controls are removable, allowing an even lower minimum deck height for
transportation purposes or for using the Hustler IV chassis as a base, for use with a jib
arm...allowing no interference for 360 degree pan shots
-Hustler IV has Many Accessories Available
Specifications
| Camera Mount Height (with Standard 12" Riser) | 6 ft.
|
1.83 m
|
| Camera Mount Height (without Riser) | 5 ft.
|
1.52 m
|
| Minimum Camera Mount Height (without Risers) | 18 in.
|
46 cm
|
| Minimum Camera Mount Height (with Standard 12" Riser) | 2 ft. 6 3/4 in.
|
78 cm
|
| Minimum Camera Mount Height (w/ 90 Degree Plate) | 2 in.
|
5 cm
|
| Vertical Travel | 3 ft. 6 in.
|
1.07 m
|
| *Maximum Payload with Accumulator Charge at 3,300 psi | 750 lb |
340 kg
|
| Maximum Boom Lifts (Fully Charged) | 6 Lifts
|
|
| Chassis Length | 2 ft. 3 1/2 in.
|
70 cm
|
| Chassis Width | 4 ft. 3 in.
|
1.29 m
|
| Steering Post Height | 3 ft. 4 3/4 in. |
1.03 m
|
| Front Deck Height | 12 3/4 in. |
32 cm
|
| Rear Deck Height | 17 in.
|
43 cm
|
| Minimum Deck Height for Transportation | 19 1/2 in.
|
50 cm
|
| Minimum Turn Radius (Round Mode) | 2 ft. 4 in.
|
71 cm
|
| Minimum Turn Radius (Conventional Mode) | 3 ft. 10 in.
|
1.17 m
|
| Accumulator Charging Time (110 A.C. and D.C.) | under 60 sec.
|
|
| Accumulator Charging Time (Hand Pump) | 2 min.
|
|
| Carrying Weight | 465 lb
|
211 kg |
| Operational Weight (w/o Payload) | 505 lb |
229 kg |
| Hustler w/ High Post Kit Operational Weight (w/o Payload) | 465 lb |
210 kg |
| *Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm. | ||
| **Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount. | ||
By Christine Huenergardt
Copyright © 2011 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.