Amphibian 3 Axis
3 Axis Waterproof w/ Preston System
(Item #40175)
 Amphibian 3 Axis Head Pictres With Water Setup
|
|
|---|
Features
-Compact 3 Axis Remote Head is Waterproof and can be Submerged
Underwater
-Can
Be Used with Film Magazines up to 1,000 ft. in Size
-Rotates 360 Degrees Pan, Tilt and Roll with Lenses up to 10:1
-Smooth
Pan, Tilt and Roll with Your Choice of Hand Wheels or Joy Stick
-Joy Stick
Control System Offers One Man Pan/Tilt and Roll/Zoom
-Comes
with Witness Camera, F.I.Z. Controls, HD Viewing Monitors and Mobile Control Cart
-CL
Battery Pack and Chargers Available for Reliable and Long Lasting Power
-Works
on All Types of Camera Crane Arms, Dollies and Camera Cars
-Smooth,
Silent Performance
-Quick
Setup and Positioning
-All
Sides of the Camera are Easily Accessed for Loading and Lens Changes
-Open
Side Chassis for Tight Camera Positioning
-Remote
Head Technician comes with Head Rental
-Can Be Used with a Variety of Motion Picture and Video Cameras
-Many Accessories Available
Specifications
| Maximum 3-Axis Height- Underslung* | 40 in. | 1.01 m |
| Minimum 3-Axis Height- Underslung* | 34 in. | 86.3 cm |
| Tilt Plate Length | 20 in. | 50.8 cm |
| Tilt Plate Width | 8 1/4 in. | 20.9 cm |
| Min. Camera Clearance - Under Slung | 24 1/2 in. | 62.2 cm |
| Max. Camera Clearance- Under Slung | 30 1/2 in. | 77.4 cm |
| 3-Axis Width (Full 360° Travel) | 27 1/2 in. | 71.1 cm |
| 3-Axis Weight | 110 lb | 49.8 kg |
| 3- Axis Payload Capacity | 114 lb | 51.7 kg |
| Pan, Tilt and Roll Movement | 360° | |
| Speed Range (Pan, Tilt & Roll) | 3.5 sec. | |
| Mounting Base | Custom Chapman Mitchell | |
| Outputs at Camera (via Chapman Cable Package) | BNC 75 Ohm (x3) | |
| Voltage | 12 volts @ 2 amps for video (x2) | |
| Voltage | 12 or 15 volts @10 amps peak (x2) | |
| Voltage | 24 or 30 volts @15 amps peak | |
| Lens Control Systems | Preston FIZ and Arri Lens Control | |
| Power Supply | 20-70 volts DC - .5 to .15 amps | |
| Shipping Weight (Amphibian Only) | 150 lb | 68 kg |
| Shipping Weight For Complete System | 1,045 lb | 474 kg |
| *Height measured from Top of Castle Nut to Bottom of Tilt Plate. | ||
By Christine Huenergardt
Copyright © 2011 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.