CL MINI 2 OR 3 AXIS STABILIZED DIGITAL REMOTE HEAD

CL MINI 2 OR 3 AXIS STABILIZED DIGITAL REMOTE HEAD
(Item #60065)
Features

Compact 2-Axis Gyro Stabilized Head Eliminates Unwanted Camera 'Shake' During Fast or Rough Camera Moves

Encoder Mode at the Touch of a Finger, Allowing Repeatable Moves of up to One Minute Ten Seconds Long

Encoders Capable of CGI Application in Any Axis

The CL Head has the Capability of Recording Data Through Each Axis Position To Accommodate CGI Requirements

The CL Head has the Ability to Change Configurations Making it Easy to Fit in Tight Areas Such As a Car Door Window

New Design Eliminates Drift When Used in Gyro Stabilized Mode

The CL Head Allows the Operator to Control the Speed and Dampening on All Axis by Fingertip Through the Wheel Console

The CL Head Operator has the Capability to Adjust Stop Limits on the Fly Through the Wheel Console

The CL Head Side Plates Can be Adjusted in Seconds to Accommodate Camera and Lens Clearance, While Keeping the Camera Balanced

Can Be Used with Film Magazines up to 1,000 ft. in Size

Rotation of Pan is + or - 720 Degrees, Tilt is + or - 720 Degrees and Roll is + or - 42 Degrees

Smooth Pan, Tilt and Roll with Hand Wheels Console

Incorporates Auto Leveling on Roll Axis In Both Encoder and Gyro Stabilized Modes

Comes with F.I.Z. Controls, HD Viewing Monitors and Mobile Control Cart

Can be Utilized in Either 2-Axis or 3-Axis Configuration

CL Battery Pack and Chargers Available for Reliable and Long Lasting Power

Works on All Types of Camera Crane Arms, Dollies and Camera Cars

Smooth, Silent Performance

Quick Setup and Positioning

All Sides of the Camera are Easily Accessed for Loading and Lens Changes

Remote Head Technician Dispatched with Head Rental

Water Resistant

Can Be Used with a Variety of Motion Picture and Video Cameras, Especially Many 3D Setups

Can Handle Payloads of up to 100 lb

Specifications
Minimum 2 or 3-Axis Height* 25.4 in 64.5 cm
Maximum 2 or 3-Axis Height* 32.9 in. 83.6 cm
2 or 3-Axis Depth 9.3 in. 23.8 cm
Minimum 2 or 3 Axis Width 18.7 in. 47.4 cm
Maximum 2 or 3 Axis Width 21.7 in. 55.1 cm
Minimum 2 or 3-Axis Camera Clearance-Height 18.4 46.7 cm
Maximum 2 or 3-Axis Camera Clearance-Height 26.1 in. 66.2 cm
Minimum 2 or 3-Axis Camera Clearance-Width 10 in 25.4 cm
Maximum 2 or 3-Axis Camera Clearance-Width 13 in 33 cm
2-Axis Weight without Payload 61 lb 27.7 kg
2-Axis Payload Capacity (Recommended) 100 lb 45.4 kg
3-Axis Weight w/o Payload 85 lb 36.6 kg
3-Axis Payload Capacity (Recommended) 100 lb 45.4 kg
Pan and Tilt + or - 540 degrees
Roll Movement + or - 42 degrees
Speed Range (Pan, Tilt & Roll) Adjustable
Mounting Base Standard Mitchell
Voltage 24 or 30 volts @15 amps peak
Lens Control Systems Preston FIZ and Arri Lens Control
Cable Supply Wide Range
*Height measured from Top of Castle Nut to Bottom of Tilt Plate
Accessories
Standard Accessories Package
No accessories for this package.
Accessories
Leasing Accessories Package
No accessories for this package.
Accessories
All Accessories
No accessories for this product.
Line Drawing