CL Head 3 Axis Stabilized Digital Remote Head

CL Head 3 Axis Stabilized Digital Remote Head
(Item #60050)
Features

Compact 3-Axis Gyro Stabilized Head Eliminates Unwanted Camera 'Shake' During Fast or Rough Camera Moves

Encoder Mode at the Touch of a Finger, Allowing Repeatable Moves of up to One Minute Ten Seconds Long

Encoders Capable of CGI Application in Any Axis

The CL Head has the Capability of Recording Data Through Each Axis Position To Accommodate CGI Requirements

The CL Head has the Ability to Change Configurations Making it Easy to Fit in Tight Areas Such As a Car Door Window

New Design Eliminates Drift When Used in Gyro Stabilized Mode

The CL Head Allows the Operator to Control the Speed and Dampening on All Axis at Their Finger Tips Through the Wheel Console

The CL Head Operator has the Capability to Adjust Stop Limits on the Fly Through the Wheel Console

The CL Head Side Plates Can be Adjusted in Seconds to Accommodate Camera and Lens Clearance, While Keeping the Camera Balanced

Can Be Used with Film Magazines up to 1,000 ft. in Size

Rotation of Pan is + or - 720 Degrees, Tilt is + or - 720 Degrees and Roll is + or - 42 Degrees

Smooth Pan, Tilt and Roll with Hand Wheels Console

Incorporates Auto Leveling on Roll Axis In Both Encoder and Gyro Stabilized Modes

Comes with F.I.Z. Controls, HD Viewing Monitors and Mobile Control Cart

Can be Utilized in Either 2-Axis or 3-Axis Configuration

CL Battery Pack and Chargers Available for Reliable and Long Lasting Power

Works on All Types of Camera Crane Arms, Dollies and Camera Cars

Smooth, Silent Performance

Quick Setup and Positioning

All Sides of the Camera are Easily Accessed for Loading and Lens Changes

Remote Head Technician Dispatched with Head Rental

Water Resistant

Can Be Used with a Variety of Motion Picture and Video Cameras, Especially Many 3D Setups

Can Handle Payloads of up to 100 lb

Specifications
Minimum 2 or 3-Axis Height* 28 in 71.1 cm
Maximum 2 or 3-Axis Height* 35.3 in. 89.3 cm
2 or 3-Axis Depth 15.75 in. 40 cm
Minimum 2 or 3 Axis Width 20.75 in. 52.7 cm
Maximum 2 or 3 Axis Width 23.75 in. 60.3 cm
Minimum 2 or 3-Axis Camera Clearance-Height 20.25 in 51.4 cm
Maximum 2 or 3-Axis Camera Clearance-Height 27.3 in. 69.3 cm
Minimum 2 or 3-Axis Camera Clearance-Width 16.9 in 42.8 cm
Maximum 2 or 3-Axis Camera Clearance-Width 19.9 in 50.4 cm
2-Axis Weight without Payload 61 lb 27.7 kg
2-Axis Payload Capacity (Recommended) 100 lb 45.4 kg
3-Axis Weight without Payload 85 lb 36.6 kg
3-Axis Payload Capacity (Recommended) 100 lb 45.4 kg
Pan and Tilt and Roll Movement + or - 720 degrees
Roll Movement + or - 42 degrees
Speed Range (Pan, Tilt & Roll) Adjustable
Mounting Base Standard Mitchell
Outputs at Camera (via Chapman Cable Package) BNC 75 Ohm (x3)
Voltage 12 volts at 2 amps for video (x2)
Voltage 12 or 15 volts at 10 amps peak (x2)
Voltage 24 or 30 volts at 15 amps peak
Lens Control Systems Preston FIZ and Arri Lens Control
Power Supply 20-70 volts DC - .5 to .15 amps
Cable Supply Wide Range
Accessories
All Accessories Package
No accessories for this package.
Accessories
Standard Accessories Package
No accessories for this package.
Accessories
Leasing Accessories Package
No accessories for this package.
Line Drawing