STINGER PLUS ARM WITH GLIDING HEAD
(Jib Arm with 2 Axis Gliding Head)


Stinger Arm (Item #12500)

STINGER PLUS ARM FEATURES

bullet StingerArm Glide System Allows up to 2 ft. of Horizontal Travel

The Stinger Cart simplifies assembly of the arm and  transportation.

 

 

bullet Maximum Height of Mitchell Mount above the Stinger Arm Base is 82 in.
bullet Black Anodized Arm for Easy Maintenance
bullet Works on Super PeeWee® IV and Hybrid Camera Dollies, along with a Variety of Bases
bullet Works on Any Chapman Dolly when Using a Post Kit Setup
bullet Precision Design for Rigidity without the Need for Cabling System
bullet New Mobile Storage Base for Easy Transportation and Quick Setup
bullet Comes Assembled and Ready for Use
bullet Stinger Arm Glide System Has Drag Control
bullet Cushioned Stops and Dampening Points at Top and Bottom Travel of the Arm
bullet Fluid Dampening System Resulting in Zero Backlash
bullet 360° Continuous Pan Travel
bullet Works with a Variety of Heads (Including Remote Camera Systems)
bullet Designed to Work within Tight Areas
bullet Precision Design Weights Are Contoured and Shaped on a Radius to Follow the Arc of the Arm
bullet A Variety of Counter Balance Weights Available from 2 1/2 lbs. to 25 lbs.
bullet Compact and Lightweight Arm

STINGER PLUS ARM GLIDING HEAD FEATURES

bullet Head Can Be either Overslung for More Height or Underslung
bullet Black Anodized Head for Easy Maintenance
sting6.gif (172006 bytes)
bullet Glide System Has Drag Control
bullet Precision Bubble Level
bullet Standard Mitchell Mount, Allowing Stinger to Work with Most Fluid Heads and Remote Systems

SPECIFICATIONS

LEGEND OF TERMS AND CONDITIONS

MH= Maximum Height
MR= Maximum Reach
MP= Maximum Payload
BW= Bucket Weight for Balanced Arm (no payload)
BAW= Balanced Arm Weight for any given nose load
MOW= Maximum Operating Weight of Unit
BR= Balance Ratio
UW= Unit Weight


                                                                               

Stinger Configuration #1
2 Foot Glider

No Added Sections


MH = 51.25”
MR = 5 feet
MP = 183.75 lbs.
BW = 57.5 lbs.
BAW = 187.5 lbs.
MOW = 738.75 lbs.
MOW w/ 100 lbs. Payload = 487.5 lbs.
BR = 2:1
UW = 130 lbs.
 
Stinger Configuration #2
2 Foot Glider

1 Foot Section - Front


MH = 61.25”
MR = 6 feet
MP = 116 lbs.
BW = 105 lbs.
BAW = 242.5 lbs.
MOW = 667.5 lbs.
MOW w/ 100 lbs. Payload = 617.5 lbs.
BR = 2.75:1
UW = 137.5 lbs.
 
Stinger Configuration #3
2 Foot Glider

2 Foot Section - Front

MH = 71”
MR = 7 feet
MP = 75 lbs.
BW = 150 lbs.
BAW = 292 lbs.
MOW = 645 lbs.
BR = 3.5:1
UW = 142 lbs.
Stinger Configuration #4
2 Foot Glider

1 Foot Section - Rear

 

MH = 51.25”
MR = 5 feet (60”)
MP = 367 lbs.
BW = 10 lbs.
BAW = 147.5 lbs.
MOW = 929.5 lbs.
MOW w/ 100 lbs. Payload = 360.5 lbs.
BR = 1.13:1
UW = 137.5 lbs.
Stinger Configuration #5
2 Foot Glider

1 Foot Section - Front and
1 Foot Section - Rear

MH = 61.25”
MR = 6 feet (72”)
MP = 246 lbs.
BW = 37.5 lbs.
BAW = 183 lbs.
MOW = 815 lbs.
MOW w/ 100 lbs. Payload = 440 lbs.
BR = 1.57:1
UW = 145.5 lbs.
Stinger Configuration #6
2 Foot Glider

2 Foot Section - Front and
1 Foot Section - Rear

MH = 70.75”
MR = 7 feet (84”)
MP = 181 lbs.
BW = 62.5 lbs.
BAW = 212.5 lbs.
MOW = 756 lbs.
MOW w/ 100lbs. Payload = 512.5 lbs.
BR = 2:1
UW = 150 lbs.
Stinger Configuration #7
2 Foot Glider

2 Foot Section - Front plus
1 Foot Section Front and

MH = 82.25”
MR = 8 feet (96”)
MP = 133 lbs.
BW = 100 lbs.
BAW = 258 lbs.
MOW = 716 lbs.
MOW w/ 100 lbs.
Payload = 602 lbs.
BR = 2.44:1
UW = 158 lbs.
 

CLICK HERE TO DOWNLOAD AND PRINT FULL STINGER JIB ARM USERS GUIDE AND  SPECIFICATIONS BOOK

acrobox.gif (3947 bytes)

If you do not have Acrobat Reader installed, please download 

To receive the full Stinger Plus Specification book, please contact
Chapman / Leonard Studio Equipment, Inc. or e-mail us.

Back to Products Page

By Christine Huenergardt
Copyright © 2000 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.