HUSTLER IV
(Hydraulic Lift Camera Dolly)

Hustler  (Item #20010)

hustlerIV.jpg (240023 bytes)

HUSTLER IV FEATURES

bullet New Sliding Side Board System with both high and low positions. This allows a variety of positions for the side boards, i.e. all the way forward or all the way back, without removing or changing the boards. Hustler IV Side Board System incorporates seat and/or light pockets for convenient placement of seats or lights.
bullet Accommodates three types of steering modes: Conventional, Crab, and Round
bullet Built-in heater system for constant arm speed, even in cold weather conditions
bullet Hustler IV can be used with Rain House Cover
bullet Hustler IV has Many Accessories Available (CLICK HERE FOR LIST OF ACCESSORIES &  PACKAGES)
bullet Hustler IV has new 12" extensions for the built-in Tracking Bar for use while dolly is on track
bullet Works on both straight or curved track without auxiliary wheels
bullet Performance on track has been improved due to new track wheel design
bullet Works on standard 24 1/2" dolly track
bullet Greater payload, which enables the Hustler IV to carry many types of jib arms
bullet New Hydraulic system for smoother, more precise camera moves
bullet Arm is more rigid, due to improved bearing system
bullet Selectable, adjustable single, double or triple detent system on main valve control for responsive control of arm movement
bullet Improved stop valve system which allows even faster, smoother stops
bullet New built-in 4-way leveling head with built-in camera swing head with quick release locking system, ergonomically designed for use on the set
bullet New wheel design has dramatically reduced friction for smooth, rolling shots when pushing the dolly on a smooth floor surface
bullet All dolly deck controls are removable, allowing an even lower minimum deck height for transportation purposes or for using the Hustler IV chassis as a base, for use with a jib arm...allowing no interference for 360 degree pan shots

 

SPECIFICATIONS

Click here to view line drawing specs
bullet Camera Mount Height (without Risers)
60 in. 1.5 m
bullet Camera Mount Height (with Standard 12" Riser)

72 in.

1.8 m
bullet Minimum Camera Mount Height (without Risers)

18 in.

48 cm
bullet Minimum Camera Mount Height (with Standard 12" Riser)

30 3/4 in.

78 cm
bullet Minimum Camera Mount Height (w/ 90 Degree Plate)

2 in.

5 cm
bullet Vertical Travel

42 in.

1.06 m
bullet *Maximum Payload with Accumulator Charge at 3,300 psi

750 lb.

341 kg
bullet Maximum Boom Lifts (Fully Charged at 3,300 psi)

6 Lifts
bullet Chassis Length

51 in.

1.3 m
bullet Chassis Width

27 1/2 in.

70 cm
bullet Steering Post Height

40 3/4 in.

1.03 m
bullet Front Deck Height

12 3/4 in.

32 cm
bullet Rear Deck Height

17 in.

43 cm
bullet Minimum Deck Height for Transportation

19 1/2 in.

50 cm
bullet Minimum Turn Radius (Round Mode)

28 in.

71 cm
bullet Minimum Turn Radius (Conventional Mode)

46 in.

1.2 m
bullet Accumulator Charging Time (110 A.C. and D.C.)

under 60 sec.
bullet Accumulator Charging Time (Hand Pump)

2 min.
bullet Carrying Weight

465 lb.

211 kg
bullet Operational Weight (w/o Payload)
505 lb. 230 kg
bullet *Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm.

CLICK HERE TO DOWNLOAD AND PRINT FULL HUSTLER  IV USERS GUIDE

If you do not have Acrobat Reader installed, please download  acrobox.gif (3947 bytes)

To receive the full Hustler IV Users Guide book, please contact
Chapman / Leonard Studio Equipment, Inc. or e-mail us.

Back to Products Page
By Christine Huenergardt
Copyright © 2000 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.