APOLLO & SUPER APOLLO
(Mobile Crane) 

Apollo  (Item #6210)
Super Apollo  (Item #6220)

       Apollo1.JPG (39765 bytes)

Apollo Features

Remote Controlled Power Steering for Rear Wheels
Heavy Duty Braking Applied to All 4 Wheels

Battery Powered Hydraulic Arm Brakes

Gasoline Engine or Electric Motor Capabilities
Hydraulic Leveling in Less Than 5 Seconds
Hand or Foot Operated Camera Turrets
Qualified Driver Sent with Every Order
Cruises at 50 mph
4-Wheel Steering
Defies Most Terrain
Partial Crabbing Ability
Swings 360 Degrees
Electrically Operated Arm Brakes
Super Apollo Comes with a Built-In Generator to Recharge Batteries while in Remote Locations
Many Accessories Available  

(CLICK HERE FOR LIST OF ACCESSORIES &  PACKAGES)

SPECIFICATIONS

Click here to view line drawing specs

  Lens Height (with 12" Riser, Turret and Camera)
19 ft. 5 in. 5.9 m
  Reach beyond Chassis to Lens
12 ft. 9 in. 3.9 m
  Reach beyond Chassis with Extension (with standard 6' Extension)
18 ft. 9 in. 5.7 m
  Vertical Travel of Boom above Ground
15 ft. 5 in. 4.7 m
  Vertical Travel of Boom below Ground
10.5  in. 27 cm
  Chassis Width
7 ft. 7.5 in. 2.3 m
  Chassis Length
15 ft. 11 in. 4.7 m
  Minimum Chassis Height
8 ft. 4 in. 2.5 m
  Fully Extended Boom Length
23 ft. 7 m
  Maximum Length of Boom and Chassis
29 ft. 4 in. 8.9 m
  Clearance Height for Man and Camera with Arm Level and Post down
10 ft. 1 in. 3 m
  Crane Traveling Weight
17,500 lb. 7,955 kg
  Arm Balancing Ratio
1.9 / 1
  Gross Weight with 600 lb. Nose Load
18,100 lb. 8,227 kg
  Tread
6 ft. 4 in. 1.9 m
  Wheel Base

    10 ft

3.2 m
  Ground Clearance with Arm Level (Post up)
7 ft. 2.1 m
  Maximum Speed on Level Ground (BATT) (ft. / sec.)
11 ft. / 2 sec. 3.4 m / 2 sec.
  Minimum Turn Radius to Extremity of Chassis

21 ft. 2 in.

6.5 m

*Maximum Payload (with Bucket Extension)

1,982 lb.

900.9 kg

   
*Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount.

Back to Products Page

By Christine Huenergardt
Copyright © 2010 Chapman / Leonard Studio Equipment, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.