ELECTRA II / NIKE
 (Stage / Location Crane)

Electra 11'  (Item # 3310)

elecnike.JPG (28723 bytes)                               

Electra 11' Nike Features

-Operates on 4 Tires
-Solid or Pneumatic Tires Available
-Large High Capacity Batteries
-360 Degree Arm Swing
-Rocker Suspension
-Turns Around Front Wheels
-All Steel Construction
-Hydraulic Chassis and Parking Brake
-Charger Tapers off as Batteries Are Energized
-Battery Charge Pre-Set for either 110v or 220v
-Friction Brakes for Pan and Tilt Movement
-Selection of Turrets, Risers, Extensions and Aluminum Track
-Electric Powered for Smooth, Silent Operation in Forward / Reverse Modes
-Many Accessories Available   (CLICK HERE FOR LIST OF ACCESSORIES &  PACKAGES)

SPECIFICATIONS

Lens Height (with 12 in. Riser) 11 ft. 4 in. 3.5 m
Base Mount Height 6 ft. 10 in 2.1 m
Reach beyond Chassis to Lens 7 ft. 2.1 m
*Maximum Payload 600 lb. 272.7 kg
Vertical Travel of Boom above Ground 7 ft. 4 in. 2.2 m
Vertical Travel of Boom below Ground 2 in. 5 cm
Chassis Width 40 1/4 in. 1 m
Chassis Length 6 ft. 9 in. 2.1 m
Minimum Chassis Height 4 ft. 9 1/4 in. 1.5 m
Fully Extended Boom Length 13 ft. 3.9 m
Maximum Length of Boom and Chassis 13 ft. 9 in. 4.2 m
Clearance Height for Man and Camera w/ Arm Level 7 ft. 2.1 m
Crane Weight w/Turret 3,000 lb. 1,364 kg
Arm Balancing Ratio 1.5 : 1  
Tread 36 3/4 in. 1 m
Wheel Base 48 in. 1.2 m
Ground Clearance w/ Arm Level 43 in. 1.1 m
Maximum Speed on Level Ground 8.8 ft. / sec. 2.4 m / sec.
Outside Turn Radius 6 ft. 8 in. 2 m
Normal Operating Weight Less Payload* 4,500 lb. 2,045 kg
     
*Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount.

Back to Products Page

By Christine Huenergardt
Copyright © 2000 Chapman / Leonard Studio Equipment, Inc. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.