Compact 3-Axis Gyro Stabilized Head Eliminates Unwanted Camera 'Shake' During Fast or Rough Camera Moves
Encoder Mode at the Touch of a Finger, Allowing Repeatable Moves of up to One Minute Ten Seconds Long
Encoders Capable of CGI Application in Any Axis
The CL Head has the Capability of Recording Data Through Each Axis Position To Accommodate CGI Requirements
The CL Head has the Ability to Change Configurations Making it Easy to Fit in Tight Areas Such As a Car Door Window
New Design Eliminates Drift When Used in Gyro Stabilized Mode
The CL Head Allows the Operator to Control the Speed and Dampening on All Axis at Their Finger Tips Through the Wheel Console
The CL Head Operator has the Capability to Adjust Stop Limits on the Fly Through the Wheel Console
The CL Head Side Plates Can be Adjusted in Seconds to Accommodate Camera and Lens Clearance, While Keeping the Camera Balanced
Can Be Used with Film Magazines up to 1,000 ft. in Size
Rotation of Pan is + or - 720 Degrees, Tilt is + or - 720 Degrees and Roll is + or - 42 Degrees
Smooth Pan, Tilt and Roll with Hand Wheels Console
Incorporates Auto Leveling on Roll Axis In Both Encoder and Gyro Stabilized Modes
Comes with F.I.Z. Controls, HD Viewing Monitors and Mobile Control Cart
Can be Utilized in Either 2-Axis or 3-Axis Configuration
CL Battery Pack and Chargers Available for Reliable and Long Lasting Power
Works on All Types of Camera Crane Arms, Dollies and Camera Cars
Smooth, Silent Performance
Quick Setup and Positioning
All Sides of the Camera are Easily Accessed for Loading and Lens Changes
Remote Head Technician Dispatched with Head Rental
Water Resistant
Can Be Used with a Variety of Motion Picture and Video Cameras, Especially Many 3D Setups
Can Handle Payloads of up to 100 lb
| Minimum 2 or 3-Axis Height* | 28 in | 71.1 cm |
| Maximum 2 or 3-Axis Height* | 35.3 in. | 89.3 cm |
| 2 or 3-Axis Depth | 15.75 in. | 40 cm |
| Minimum 2 or 3 Axis Width | 20.75 in. | 52.7 cm |
| Maximum 2 or 3 Axis Width | 23.75 in. | 60.3 cm |
| Minimum 2 or 3-Axis Camera Clearance-Height | 20.25 in | 51.4 cm |
| Maximum 2 or 3-Axis Camera Clearance-Height | 27.3 in. | 69.3 cm |
| Minimum 2 or 3-Axis Camera Clearance-Width | 16.9 in | 42.8 cm |
| Maximum 2 or 3-Axis Camera Clearance-Width | 19.9 in | 50.4 cm |
| 2-Axis Weight without Payload | 61 lb | 27.7 kg |
| 2-Axis Payload Capacity (Recommended) | 100 lb | 45.4 kg |
| 3-Axis Weight without Payload | 85 lb | 36.6 kg |
| 3-Axis Payload Capacity (Recommended) | 100 lb | 45.4 kg |
| Pan and Tilt and Roll Movement | + or - 720 degrees | |
| Roll Movement | + or - 42 degrees | |
| Speed Range (Pan, Tilt & Roll) | Adjustable | |
| Mounting Base | Standard Mitchell | |
| Outputs at Camera (via Chapman Cable Package) | BNC 75 Ohm (x3) | |
| Voltage | 12 volts at 2 amps for video (x2) | |
| Voltage | 12 or 15 volts at 10 amps peak (x2) | |
| Voltage | 24 or 30 volts at 15 amps peak | |
| Lens Control Systems | Preston FIZ and Arri Lens Control | |
| Power Supply | 20-70 volts DC - .5 to .15 amps | |
| Cable Supply | Wide Range | |
